Comparison of the stiffnesses of three types of porous structures

Monková, Katarína; Monka, Peter Pavol; Božić, Željko; Rački, Iva

dc.title	Comparison of the stiffnesses of three types of porous structures	en
dc.contributor.author	Monková, Katarína
dc.contributor.author	Monka, Peter Pavol
dc.contributor.author	Božić, Željko
dc.contributor.author	Rački, Iva
dc.relation.ispartof	Procedia Structural Integrity
dc.identifier.issn	2452-3216 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.isbn	9781713870302
dc.identifier.isbn	9781713870418
dc.date.issued	2025
utb.relation.volume	68
dc.citation.spage	588
dc.citation.epage	591
dc.event.title	24th European Conference on Fracture, ECF 2024
dc.event.location	Zagreb
utb.event.state-en	Croatia
utb.event.state-cs	Chorvatsko
dc.event.sdate	2024-08-26
dc.event.edate	2024-08-30
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Elsevier B.V.
dc.identifier.doi	10.1016/j.prostr.2025.06.101
dc.relation.uri	https://www.sciencedirect.com/science/article/pii/S2452321625001027
dc.relation.uri	https://www.sciencedirect.com/science/article/pii/S2452321625001027/pdf?md5=86d8ed2caf8bcd051c810d5280430a2c&pid=1-s2.0-S2452321625001027-main.pdf
dc.subject	additive technology	en
dc.subject	porous structure	en
dc.subject	specific mass	en
dc.subject	stiffness In bending	en
dc.description.abstract	The article deals with the investigation of the stiffness of selected porous structures. Three types of structures (Fisher-Koch S, Schoen IWP and Schoen F-RD) with cellular topology belonging to Triply Periodic Minimal Surfaces (TPMS) were modelled in PTC Creo software and additively manufactured by Direct Metal Laser Sintering (DMLS) technology. All samples were designed with a basic cell size of 10 x 10 x 10 mm at a specific mass of 0.5 g/cm3 to compare their properties. Based on the results, it was possible to see that the best bending stiffness was shown by the Schoen F-RD type structure.	en
utb.faculty	Faculty of Technology
dc.identifier.uri	http://hdl.handle.net/10563/1012547
utb.identifier.scopus	2-s2.0-105012356431
dc.date.accessioned	2025-11-27T12:48:51Z
dc.date.available	2025-11-27T12:48:51Z
dc.description.sponsorship	The article was prepared thanks to the support of the Ministry of Education of the Slovak Republic through the grants APVV-19-0550, APVV SK-AT-23-0008, KEGA 032TUKE-4/2022 and KEGA 042TUKE-4/2025.
dc.rights	Attribution-NonCommercial-NoDerivatives 4.0 International
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.rights.access	openAccess
utb.contributor.internalauthor	Monková, Katarína
utb.contributor.internalauthor	Monka, Peter Pavol
utb.fulltext.sponsorship	The article was prepared thanks to the support of the Ministry of Education of the Slovak Republic through the grants APVV-19-0550, APVV SK-AT-23-0008, KEGA 032TUKE-4/2022 and KEGA 042TUKE-4/2025.
utb.scopus.affiliation	Technická Univerzita v Košiciach, Kosice, Slovakia; Tomas Bata University in Zlin, Zlin, Czech Republic; Sveučilište u Zagrebu, Fakultet Strojarstva i Brodogradnje, Zagreb, Croatia
utb.fulltext.projects	APVV-19-0550
utb.fulltext.projects	APVV SK-AT-23-0008
utb.fulltext.projects	KEGA 032TUKE-4/2022
utb.fulltext.projects	KEGA 042TUKE-4/2025