TBU Publications
Repository of TBU Publications

Chemical treatment of PLA composite waste for resource recovery

DSpace Repository

Show simple item record


dc.title Chemical treatment of PLA composite waste for resource recovery en
dc.contributor.author Domincová Bergerová, Eva
dc.contributor.author Císař, Jaroslav
dc.contributor.author Strašáková, Monika
dc.contributor.author Uhercová, Simona
dc.contributor.author Hanušová, Dominika
dc.contributor.author Škoda, David
dc.contributor.author Sedlařík, Vladimír
dc.relation.ispartof Waste Management
dc.identifier.issn 0956-053X Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2027
utb.relation.volume 228
dc.type article
dc.language.iso en
dc.publisher Elsevier Ltd
dc.identifier.doi 10.1016/j.wasman.2026.115971
dc.subject poly(lactic acid) en
dc.subject PLA composite waste en
dc.subject chemical treatment en
dc.subject alcoholysis en
dc.subject resource recovery en
dc.description.abstract The increasing use of PLA (polylactic acid) materials has led to growing amounts of composite waste containing industrial additives that complicate end-of-life treatment. Although alcoholysis represents a promising chemical treatment route for the depolymerization of PLA and recovery of value-added products, systematic studies addressing commercially relevant PLA composites under comparable alcoholysis conditions remain scarce. This study investigates the alcoholysis depolymerization of PLA-based composites containing typical industrial components, including calcium carbonate (1–10 wt%), carbon black, plasticizers, cellulose, and minor polymeric components. Depolymerization was performed in an acetone/ethanol system at 70 °C using the organocatalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene, enabling recovery of ethyl lactate, a bio-based solvent. Depolymerization efficiencies ranged from 61 to 100%, depending on composite composition and material structure. High depolymerization efficiencies and PLA conversion to ethyl lactate were obtained for materials with low additive content. PLA conversion reached up to 98% for neat PLA. Higher inorganic filler content (>2%) and cellulose-rich composites showed markedly reduced depolymerization and product formation. Structural and thermal characterization demonstrated differences in crystallinity, thermal stability, and accessibility of the PLA phase, thereby affecting alcoholysis performance. This work provides practical insight into the chemical treatment of PLA composite waste under mild conditions and highlights the potential for resource recovery through ethyl lactate production. en
utb.faculty University Institute
dc.identifier.uri http://hdl.handle.net/10563/1012875
utb.identifier.scopus 2-s2.0-105055824006
utb.identifier.coden WAMAE
utb.source j-scopus
dc.date.accessioned 2026-07-06T08:16:38Z
dc.date.available 2026-07-06T08:16:38Z
utb.contributor.internalauthor Domincová Bergerová, Eva
utb.contributor.internalauthor Císař, Jaroslav
utb.contributor.internalauthor Strašáková, Monika
utb.contributor.internalauthor Uhercová, Simona
utb.contributor.internalauthor Hanušová, Dominika
utb.contributor.internalauthor Škoda, David
utb.contributor.internalauthor Sedlařík, Vladimír
utb.fulltext.affiliation Eva Domincova Bergerova1*, Jaroslav Cisar1, Monika Strasakova1, Simona Uhercova1, Dominika Hanusova1, Miroslava Dusankova1, David Skoda1, Vladimir Sedlarik1 1 Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, tr. Tomase Bati 5678,760 01 Zlin, Czech Republic *Corresponding author: Eva Domincova Bergerova, domincova_bergerova@utb.cz
utb.fulltext.dates Preprint: 2026-07-06
utb.fulltext.references Alaerts, L., Augustinus, M., Van Acker, K., 2018. Impact of bio-based plastics on current recycling of plastics. Sustainability (Switzerland) 10. https://doi.org/10.3390/su10051487 Aliotta, L., Cinelli, P., Coltelli, M.B., Righetti, M.C., Gazzano, M., Lazzeri, A., 2017. Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA). Eur. Polym. J. 93, 822–832. https://doi.org/10.1016/j.eurpolymj.2017.04.041 Arrigo, R., Bartoli, M., Malucelli, G., 2020. Poly(lactic Acid)-biochar biocomposites: Effect of processing and filler content on rheological, thermal, and mechanical properties. Polymers (Basel). 12, 1–13. https://doi.org/10.3390/POLYM12040892 Auras, R., Harte, B., Selke, S., 2004. An overview of polylactides as packaging materials. Macromol. Biosci. https://doi.org/10.1002/mabi.200400043 Azarian, M.H., Sutapun, W., 2022. Biogenic calcium carbonate derived from waste shells for advanced material applications: A review. Front. Mater. 9, 1–17. https://doi.org/10.3389/fmats.2022.1024977 Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N.D., Vlachopoulos, A., Koumentakou, I., Bikiaris, D.N., 2021. Poly(lactic acid): A versatile biobased polymer for the future with multifunctional properties-from monomer synthesis, polymerization techniques and molecular weight increase to PLA applications. Polymers (Basel). https://doi.org/10.3390/polym13111822 Behrens, A., 2016. Time to connect the dots: What is the link between climate change policy and the circular economy? Brussels. Bergerova, E.D., Strasakova, M., Cisar, J., Sopik, T., Dusankova, M., Vincent, I., Klaban, J., Hanusova, D., Uhercova, S., Hanykova, L., Sedlarik, V., 2025. Impact of solvolysis on the decomposition efficiency of poly(lactic acid) materials with insight into their non-uniform architecture. Int. J. Biol. Macromol. 302, 140529. https://doi.org/10.1016/j.ijbiomac.2025.140529 Betancourt, N.G., Cree, D.E., 2017. Mechanical Properties of Poly (lactic acid) Composites Reinforced with CaCO3 Eggshell Based Fillers. MRS Adv. 2, 2545–2550. https://doi.org/10.1557/adv.2017.473 Carné Sánchez, A., Collinson, S.R., 2011. The selective recycling of mixed plastic waste of polylactic acid and polyethylene terephthalate by control of process conditions. Eur. Polym. J. 47, 1970–1976. https://doi.org/10.1016/j.eurpolymj.2011.07.013 Cisar, J., Drohsler, P., Pummerova, M., Sedlarik, V., Skoda, D., 2023. Composite based on PLA with improved shape stability under high-temperature conditions. Polymer (Guildf). 276. https://doi.org/10.1016/j.polymer.2023.125943 Coman, A.E., Ionescu, G., Gîfu, I.C., Teodorescu, G.M., Magdziarz, A., Mărculescu, C., 2026. Development and characterization of PLA-based hybrid composites reinforced with chicken bone-derived fillers. J. Environ. Chem. Eng. 14. https://doi.org/10.1016/j.jece.2026.122487 Cuadri, A.A., Martín-Alfonso, J.E., 2018. Thermal, thermo-oxidative and thermomechanical degradation of PLA: A comparative study based on rheological, chemical and thermal properties. Polym. Degrad. Stab. 150, 37–45. https://doi.org/10.1016/j.polymdegradstab.2018.02.011 Cvek, M., Paul, U.C., Zia, J., Mancini, G., Sedlarik, V., Athanassiou, A., 2022. Biodegradable Films of PLA/PPC and Curcumin as Packaging Materials and Smart Indicators of Food Spoilage. ACS Appl. Mater. Interfaces 14, 14654–14667. https://doi.org/10.1021/acsami.2c02181 des Ligneris, E., Dumée, L.F., Kong, L., 2020. Nanofibers for heavy metal ion adsorption: Correlating surface properties to adsorption performance, and strategies for ion selectivity and recovery. Environ. Nanotechnol. Monit. Manag. 13, 100297. https://doi.org/10.1016/J.ENMM.2020.100297 Ellis, S., Buchard, A., Junkers, T., 2024. Depolymerisation of poly(lactide) under continuous flow conditions. Chem. Sci. 16, 211–217. https://doi.org/10.1039/d4sc05891g Erwin T. H. VinkSteve Davies, 2015. Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ® Polylactide Production. Industrial Biotechnology 11, 167–180. Erwin T.H. Vink a, Karl R. Rábago, David A. Glassner b , Patrick R. Gruber, 2003. Applications of life cycle assessment to NatureWorksTM polylactide (PLA) production. Polym. Degrad. Stab. 403419. Faba, S., Agüero, Á., Arrieta, M.P., Martínez, S., Romero, J., Torres, A., Galotto, M.J., 2024. Foaming of 3D-Printed PLA/CaCO3 Composites by Supercritical CO2 Process for Sustainable Food Contact Materials. Polymers (Basel). 16, 798. https://doi.org/10.3390/polym16060798 Finnerty, J., Rowe, S., Howard, T., Connolly, S., Doran, C., Devine, D.M., Gately, N.M., Chyzna, V., Portela, A., Bezerra, G.S.N., McDonald, P., Colbert, D.M., 2023. Effect of Mechanical Recycling on the Mechanical Properties of PLA-Based Natural Fiber-Reinforced Composites. Journal of Composites Science 7, 1–17. https://doi.org/10.3390/jcs7040141 Geyer, R., Jambeck, J.R., Law, K.L., 2017. “Production , use , and fate of all plastics ever made” CA 93106; Bren School of Environmental Science and Management, University of California, Santa Barbara, Santa Barbara, USA. Sci. Adv. 3, 25–29. Ghanbarzadeh, B., Almasi, H., 2013. Biodegradable Polymers, in: Chamy, R., Rosenkranz, F. (Eds.), Biodegradation – Life of Science. IntechOpen. https://doi.org/10.5772/56230 González-López, M.E., Martín del Campo, A.S., Robledo-Ortíz, J.R., Arellano, M., Pérez-Fonseca, A.A., 2020. Accelerated weathering of poly(lactic acid) and its biocomposites: A review. Polym. Degrad. Stab. 179. https://doi.org/10.1016/j.polymdegradstab.2020.109290 Hopmann, C., Schippers, S., Höfs, C., 2015. Influence of recycling of poly(lactic acid) on packaging relevant properties. J. Appl. Polym. Sci. 132, 1–6. https://doi.org/10.1002/app.41532 Huang, N., Wang, J., 2009. A TGA-FTIR study on the effect of CaCO3 on the thermal degradation of EBA copolymer. J. Anal. Appl. Pyrolysis 84, 124–130. https://doi.org/10.1016/j.jaap.2009.01.001 Ineke Velghe, MURAKAMI, M., 1993. Melt Processing. Melt Processed High-Temperature Superconductors 21–44. https://doi.org/10.1142/9789814335898_0003 Kato, T., Suzuki, T., Amamiya, T., Irie, T., Komiyama, M., Yui, H., 1998. Effects of macromolecules on the crystallization of CaCO3 the Formation of Organic/Inorganic Composites. Supramolecular Science 5, 411–415. https://doi.org/10.1016/S0968-5677(98)00041-8 Künkel, A., Becker, J., Börger, L., Hamprecht, J., Koltzenburg, S., Loos, R., Schick, M.B., Schlegel, K., Sinkel, C., Skupin, G., Yamamoto, M., 2016. Polymers, Biodegradable, in: Ullmann’s Encyclopedia of Industrial Chemistry. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp. 1–29. https://doi.org/10.1002/14356007.n21_n01.pub2 Leibfarth, F.A., Moreno, N., Hawker, A.P., Shand, J.D., 2012. Transforming Polylactide into Value-Added Materials. J Polym Sci Part A: Polym Chem 50, 4814–4822. https://doi.org/10.1002/pola.26303 Liendo, F., Arduino, M., Deorsola, F.A., Bensaid, S., 2022. Factors controlling and influencing polymorphism, morphology and size of calcium carbonate synthesized through the carbonation route: A review. Powder Technol. 398, 117050. https://doi.org/10.1016/j.powtec.2021.117050 Liu, X., Khor, S., Petinakis, E., Yu, L., Simon, G., Dean, K., Bateman, S., 2010. Effects of hydrophilic fillers on the thermal degradation of poly(lactic acid). Thermochim. Acta 509, 147–151. https://doi.org/10.1016/J.TCA.2010.06.015 Lovecká, L., Kovářová, M., Hanušová, D., Kimmer, D., Poláchová, A., Sedlařík, V., 2025. Application of green solvents as a replacement of toxic dimethylformamide in the polylactic acid electrospinning process. Sustainable Materials and Technologies 44. https://doi.org/10.1016/j.susmat.2025.e01405 Majgaonkar, P., Hanich, R., Malz, F., Brüll, R., 2021. Chemical Recycling of Post-Consumer PLA Waste for Sustainable Production of Ethyl Lactate. Chemical Engineering Journal 423. https://doi.org/10.1016/j.cej.2021.129952 Meng, Q., Heuzey, M.C., Carreau, P.J., 2012. Control of thermal degradation of polylactide/clay nanocomposites during melt processing by chain extension reaction. Polym. Degrad. Stab. 97, 2010–2020. https://doi.org/10.1016/j.polymdegradstab.2012.01.030 Pavon, C., Aldas, M., Samper, M.D., Motoc, D.L., Ferrandiz, S., López-Martínez, J., 2022. Mechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO3 Fillers from Natural Resources. Polymers (Basel). 14. https://doi.org/10.3390/polym14132646 Pudełko, A., Postawa, P., Stachowiak, T., Malińska, K., Dróżdż, D., 2021. Waste derived biochar as an alternative filler in biocomposites - Mechanical, thermal and morphological properties of biochar added biocomposites. J. Clean. Prod. 278. https://doi.org/10.1016/j.jclepro.2020.123850 Quiles-Carrillo, L., Montanes, N., Garcia-Garcia, D., Carbonell-Verdu, A., Balart, R., Torres-Giner, S., 2018. Effect of different compatibilizers on injection-molded green composite pieces based on polylactide filled with almond shell flour. Compos. B Eng. 147, 76–85. https://doi.org/10.1016/j.compositesb.2018.04.017 Rathin Datta, M.H., 2006. Lactic acid: recent advances in products, processes and technologies . Journal of Chemical technology and Biotechnology. Román-Ramírez, L.A., McKeown, P., Jones, M.D., Wood, J., 2020. Kinetics of Methyl Lactate Formation from the Transesterification of Polylactic Acid Catalyzed by Zn(II) Complexes. ACS Omega 5, 5556–5564. https://doi.org/10.1021/acsomega.0c00291 Samir, A., Ashour, F.H., Hakim, A.A.A., Bassyouni, M., 2022. Recent advances in biodegradable polymers for sustainable applications. Npj Mater. Degrad. 6. https://doi.org/10.1038/s41529-022-00277-7 Schneider, M., Fritzsche, N., Puciul-Malinowska, A., Baliś, A., Mostafa, A., Bald, I., Zapotoczny, S., Taubert, A., 2020. Surface etching of 3D printed poly(lactic acid) with NaOH: A systematic approach. Polymers (Basel). 12. https://doi.org/10.3390/POLYM12081711 Shorey, R., Mekonnen, T.H., 2024. Oleic acid decorated kraft lignin as a hydrophobic and functional filler of cellulose acetate films. Int. J. Biol. Macromol. 268, 131672. https://doi.org/10.1016/j.ijbiomac.2024.131672 Siddiqui, M.N., Redhwi, H.H., Al-Arfaj, A.A., Achilias, Dimitris S, Siddiqui, M.N.;, Redhwi, H.H.;, Al-Arfaj, A.A.;, Achilias, D S, 2021. Chemical Recycling of PET in the Presence of the Bio-Based Polymers, PLA, PHB and PEF: A Review. Sustainability 2021, Vol. 13, Page 10528 13, 10528. https://doi.org/10.3390/SU131910528 Signori, F., Coltelli, M.B., Bronco, S., 2009. Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing. Polym. Degrad. Stab. 94, 74–82. https://doi.org/10.1016/j.polymdegradstab.2008.10.004 Södergård, A., Stolt, M., 2002. Properties of lactic acid based polymers and their correlation with composition. Prog. Polym. Sci. 27, 1123–1163. https://doi.org/10.1016/S0079-6700(02)00012-6 Spinelli, G., Lamberti, P., Tucci, V., Kotsilkova, R., Tabakova, S., Ivanova, R., Angelova, P., Angelov, V., Ivanov, E., Maio, R. Di, Silvestre, C., Meisak, D., Paddubskaya, A., Kuzhir, P., 2018. Morphological, rheological and electromagnetic properties of nanocarbon/poly(lactic) acid for 3D printing: Solution blending vs. melt mixing. Materials 11. https://doi.org/10.3390/ma11112256 Szatkowski, P., Gralewski, J., Suchorowiec, K., Kosowska, K., Mielan, B., Kisilewicz, M., 2024. Aging Process of Biocomposites with the PLA Matrix Modified with Different Types of Cellulose. Materials 17, 1–18. https://doi.org/10.3390/ma17010022 Tadi, S.P., Mamilla, R.S., 2025. Fabrication of SS 316L particle-infilled PLA composite filaments from cast-off bi-material extrudates for 3D printing applications. Waste Management 193, 386–397. https://doi.org/10.1016/j.wasman.2024.12.021 Thakur, S., Chaudhary, J., Sharma, B., Verma, A., Tamulevicius, S., Thakur, V.K., 2018. Sustainability of bioplastics: Opportunities and challenges. Curr. Opin. Green Sustain. Chem. 13, 68–75. https://doi.org/10.1016/j.cogsc.2018.04.013 Thumsorn, S., Prasong, W., Kurose, T., Ishigami, A., Kobayashi, Y., Ito, H., 2022. Rheological Behavior and Dynamic Mechanical Properties for Interpretation of Layer Adhesion in FDM 3D Printing. Polymers (Basel). 14, 1–22. https://doi.org/10.3390/polym14132721 Tonini, D., Garcia-Gutierrez, P., Nessi, S., 2021. Environmental effects of plastic waste recycling. https://doi.org/10.2760/955772 Tsou, C.-H., Luo, H., Qu, C.-L., Potiyaraj, P., Preuksarattanawut, C., Wu, C.-S., Du, J.-H., Feng, S., Ge, F.-F., 2025. High-performance conductive nanocomposites of modified poly(lactic acid) and nanocarbon black: Enhanced mechanical properties, chemically proven 3D network structure, and antibacterial features for 3D printing. International Journal of Biological Macromolecules 322, 146683. https://doi.org/10.1016/j.ijbiomac.2025.146683 Upare, P.P., Hwang, Y.K., Chang, J.S., Hwang, D.W., 2012. Synthesis of lactide from alkyl lactate via a prepolymer route. Ind. Eng. Chem. Res. 51, 4837–4842. https://doi.org/10.1021/ie202714n Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., Desplentere, F., 2023. Review on the Degradation of Poly(lactic acid) during Melt Processing. Polymers (Basel). 15, 2047. https://doi.org/10.3390/polym15092047 Xia, Y., Qian, S., Zhang, X., Zhang, Z., Zhu, C., 2024. Biochar as an efficient reinforcing agent for poly(lactic acid)/poly(ε-caprolactone) biodegradable composites with high robustness and thermo-resistance. Ind. Crops Prod. 219, 119049. https://doi.org/10.1016/j.indcrop.2024.119049 Xu, N., Meng, L., Ge, F.-F., Lan, L., Du, J., Suen, M.-C., Chao, F., Huang, J., Tsou, C.-H., 2026. Reactive interfacial design enables oxygen–moisture transport regulation in PLA/cotton-stalk films for food preservation. Future Foods, 101176. https://doi.org/10.1016/j.fufo.2026.101176 Yadav, P., Farnood, R., Kumar, V., 2021. HMO-incorporated electrospun nanofiber recyclable membranes: Characterization and adsorptive performance for Pb(II) and As(V). J. Environ. Chem. Eng. 9, 106507. https://doi.org/10.1016/J.JECE.2021.106507 Zdanowicz, M., Mizielińska, M., Kowalczyk, A., 2024. Cast Extruded Films Based on Polyhydroxyalkanoate/Poly(lactic acid) Blend with Herbal Extracts Hybridized with Zinc Oxide. Polymers (Basel). 16. https://doi.org/10.3390/polym16141954 Zou, H., Yi, C., Wang, L., Liu, H., Xu, W., 2009. Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy. J. Therm. Anal. Calorim. 97, 929–935. https://doi.org/10.1007/s10973-009-0121-5
utb.fulltext.sponsorship This work was supported from the European Just Transition Fund within the Operational Programme Just Transition under the aegis of the Ministry of the Environment of the Czech Republic, project CirkArena number CZ.10.03.01/00/22_003/0000045 and the Ministry of Education Youth and Sports of the Czech Republic, Operational Programme Johannes Amos Comenius OP JAC “Application potential development in the field of polymer materials in the context of circular economy compliance (POCEK)”, number CZ.02.01.01/00/23_021/0009004 and from the Horizon Europe programme under the project BioPackMan – Biodegradable Packaging Materials Advancing Circularity, Sustainability & Eco-Innovation (Grant Agreement No. 101178576). Authors are further grateful for co-funding from the development process of Centre of Polymer Systems, Tomas Bata University in Zlín, programme DKRVO (RP/CPS/2024-28/002) and (RP/CPS/2024-28/007) supported by the Ministry of Education Youth and Sports of the Czech Republic.
utb.fulltext.projects CZ.10.03.01/00/22_003/0000045
utb.fulltext.projects CZ.02.01.01/00/23_021/0009004
utb.fulltext.projects 101178576
utb.fulltext.projects RP/CPS/2024-28/002
utb.fulltext.projects RP/CPS/2024-28/007
utb.fulltext.faculty University Institute
utb.fulltext.ou Centre of Polymer Systems

Files in this item

Show simple item record