Contact Us | Language: čeština English
| dc.title | Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process | en |
| dc.contributor.author | Stloukal, Petr | |
| dc.contributor.author | Pekařová, Silvie | |
| dc.contributor.author | Kalendová, Alena | |
| dc.contributor.author | Mattausch, Hannelore | |
| dc.contributor.author | Laske, Stephan | |
| dc.contributor.author | Holzer, Clemens | |
| dc.contributor.author | Chitu, Livia | |
| dc.contributor.author | Bodner, Sabine | |
| dc.contributor.author | Maier, Guenther | |
| dc.contributor.author | Šlouf, Miroslav | |
| dc.contributor.author | Koutný, Marek | |
| dc.relation.ispartof | Waste Management | |
| dc.identifier.issn | 0956-053X Scopus Sources, Sherpa/RoMEO, JCR | |
| dc.date.issued | 2015 | |
| utb.relation.volume | 42 | |
| dc.citation.spage | 31 | |
| dc.citation.epage | 40 | |
| dc.type | article | |
| dc.language.iso | en | |
| dc.publisher | Pergamon Elsevier Science Ltd. | |
| dc.identifier.doi | 10.1016/j.wasman.2015.04.006 | |
| dc.relation.uri | https://www.sciencedirect.com/science/article/pii/S0956053X15002780 | |
| dc.subject | Composting | en |
| dc.subject | Biodegradability | en |
| dc.subject | Polylactic acid | en |
| dc.subject | Layered silicates | en |
| dc.subject | Abiotic hydrolysis | en |
| dc.subject | Biodegradation kinetics | en |
| dc.description.abstract | The degradation mechanism and kinetics of polylactic acid (PLA) nanocomposite films, containing various commercially available native or organo-modified montmorillonites (MMT) prepared by melt blending, were studied under composting conditions in thermophilic phase of process and during abiotic hydrolysis and compared to the pure polymer. Described first order kinetic models were applied on the data from individual experiments by using non-linear regression procedures to calculate parameters characterizing aerobic composting and abiotic hydrolysis, such as carbon mineralization, hydrolysis rate constants and the length of lag phase. The study showed that the addition of nanoclay enhanced the biodegradation of PLA nanocomposites under composting conditions, when compared with pure PLA, particularly by shortening the lag phase at the beginning of the process. Whereas the lag phase of pure PLA was observed within 27 days, the onset of CO2 evolution for PLA with native MMT was detected after just 20 days, and from 13 to 16 days for PLA with organo-modified MMT. Similarly, the hydrolysis rate constants determined tended to be higher for PLA with organo-modified MMT, particularly for the sample PLA-10A with fastest degradation, in comparison with pure PLA. The acceleration of chain scission in PLA with nanoclays was confirmed by determining the resultant rate constants for the hydrolytical chain scission. The critical molecular weight for the hydrolysis of PLA was observed to be higher than the critical molecular weight for onset of PLA mineralization, suggesting that PLA chains must be further shortened so as to be assimilated by microorganisms. In conclusion, MMT fillers do not represent an obstacle to acceptance of the investigated materials in composting facilities. (C) 2015 Elsevier Ltd. All rights reserved. | en |
| utb.faculty | University Institute | |
| utb.faculty | Faculty of Technology | |
| dc.identifier.uri | http://hdl.handle.net/10563/1005254 | |
| utb.identifier.rivid | RIV/70883521:28610/15:43873022!RIV16-MSM-28610___ | |
| utb.identifier.obdid | 43873442 | |
| utb.identifier.scopus | 2-s2.0-84983095728 | |
| utb.identifier.wok | 000357348500006 | |
| utb.identifier.pubmed | 25981155 | |
| utb.identifier.coden | WAMAE | |
| utb.source | j-wok | |
| dc.date.accessioned | 2015-08-14T09:26:22Z | |
| dc.date.available | 2015-08-14T09:26:22Z | |
| dc.description.sponsorship | European Regional Development Fund (ERDF); national budget of the Czech Republic [CZ.1.05/2.1.00/03.0111]; Ministry of Education, Youth and Sports of the Czech Republic [LE12002]; [IGA/FT/2014/005] | |
| utb.ou | Centre of Polymer Systems | |
| utb.contributor.internalauthor | Stloukal, Petr | |
| utb.contributor.internalauthor | Pekařová, Silvie | |
| utb.contributor.internalauthor | Kalendová, Alena | |
| utb.contributor.internalauthor | Koutný, Marek | |
| utb.scopus.affiliation | Stloukal P., Centre of Polymer Systems, Tomas Bata University in Zlín, nám. TGM Sqr. 5555, Zlín, 760 01, Czech Republic, Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlín, nám. TGM 5555, Zlin, 760 01, Czech Republic; Pekařová S., Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlín, nám. TGM 5555, Zlin, 760 01, Czech Republic; Kalendova A., Polymer Engineering, Faculty of Technology, Tomas Bata University in Zlín, nám. TGM 5555, Zlin, 760 01, Czech Republic; Mattausch H., Department of Polymer Engineering, Chair of Polymer Processing, Montanuniversitaet Leoben, Leoben, 8700, Austria; Laske S., Department of Polymer Engineering, Chair of Polymer Processing, Montanuniversitaet Leoben, Leoben, 8700, Austria; Holzer C., Department of Polymer Engineering, Chair of Polymer Processing, Montanuniversitaet Leoben, Leoben, 8700, Austria; Chitu L., Materials Center Leoben GmbH, Leoben, 8700, Austria; Bodner S., Materials Center Leoben GmbH, Leoben, 8700, Austria; Maier G., Materials Center Leoben GmbH, Leoben, 8700, Austria; Slouf M., Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, Praha 6-Břevnov, 162 06, Czech Republic; Koutny M., Centre of Polymer Systems, Tomas Bata University in Zlín, nám. TGM Sqr. 5555, Zlín, 760 01, Czech Republic, Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlín, nám. TGM 5555, Zlin, 760 01, Czech Republic |